We carry an extensive range of screeds and adhesives, including brands such as Ardex, Ultra Floor Level It, Instarmac, Gecko, Floorwise, Morley, Stauf, and Rewmar. We have many kinds such as, Acrylic, Contact, Pressure Sensitive, High Temperature, MS Polymer, Multi-Purpose, PVA, and Spray. Further, we have Flexible, Latex, Rapid Repair and Water based screeds.
The gold rapid curing, high performance two-part smoothing pro-screed. It has exceptional adhesion characteristics and is moisture tolerant making it suitable for use over a wide variety of subfloors and substrates, including old adhesive residues and under a DPM. Suitable for both domestic and commercial flooring projects. Technical Data Sheet
The rapid setting, ultra fine, high performance feather edge. It has exceptional adhesion characteristics does not need priming and will skim down to a feather edge. Perfect for going over gaps and ring nail holes on ply before installing LVT. Also perfect for improving the finish after applying a latex compound. Technical Data Sheet
Tilemaster Super Flow 30 is an ultra-rapid setting and drying, high performance latex based two-part self-levelling floor compound that employs advanced binder system technology, providing an underlayment where a fast-track solution is required. The specially formulated powder component is mixed with the pre-gauged, protein free polymer latex liquid, giving a free-flowing, shrinkage compensated self-levelling floor compound. • Excellent flow and adhesion. • Suitable for use over old adhesive residues including bitumen. • Install decorative floor coverings after 90 minutes and ceramic tiles after 45-60 minutes. • Apply directly to a DPM within 24 hours without priming. • Ideal for timber substrates. • Low odour. • Protein free.
The MS polymer wood flooring adhesive is a high
performance, flexible, single component, solvent and water-free adhesive for permanent bonding of all types of wood flooring. Compatible with most underfloor heating systems, the advanced polymer adhesive is both safe and clean to use • Permanent elastic bond. • One component. • Rapid curing. • Excellent initial grab. • High performance bond. • Easy application. • Solvent free. • Low VOC. • Suitable for use with underfloor heating systems.
Available in 16kg tubs & 600ml sausages
This non-plasticised, cross linking PVA emulsion adhesive is specially formulated for wood bonding in all cases where a fast set, high bond strength and excellent water resistance are required. Suitable for virtually all woods, wood decoratives and high pressure laminates. Conforms to BSEN 204:1991:D3 and BS4071 for creep resistance. Coverage: approx. 60–80 linear metres of 3mm bead per 500ml bottle • Fast drying. • High initial grab. • High shear strength. • Great temperature resistance.
Available in 500ml bottles
A versatile synthetic rubber/resin contact adhesive for bonding a wide variety of floorcoverings, PVC coving and skirtings to a wide variety of floor & wall surfaces. • Fast drying • High initial grab • High shear strength • Great temperature resistance.
Available in 5 litre tubs.
Coverage: approx. 27.5m2 on a single non-porous surface per 5 Litre can
This all-purpose adhesive is an acrylic based non staining adhesive formulated to give excellent initial grab and a high quality, durable bond when dry. • Excellent initial grab. • Durable bond when dry. • Good coverage. • Easy application.
Available in 15kg tubs
This gold standard, market leading spray adhesive can be used to fix a wide variety of floorcoverings onto most sub floors. Coverage: approx. 3m2 per 500ml can onto a single non-porous surface. • Higher solids - more adhesive per can. • Higher coat weight - more adhesive to the surface. • Excellent bond strength. • Super quick drying. • Available in 500ml aerosol cans Technical Data Sheet
A good all round spray adhesive for
permanently bonding a wide variety of
floorcoverings onto most subfloors.
Coverage: approx. 3m2
per can onto a single non-porous surface • Strong bond. • Quick drying. • Easy to use. • Available in 500ml aerosol cans
*Not suitable for highly plasticised Vinyls or PVC
This Contact spray adhesive can be used to fix a wide variety of floorcoverings onto most sub floors. Coverage: approx. 3-4m2 per 500ml can onto a single non-porous surface. • Higher adhesive per can. • Excellent bond strength. • Suitable for most vinyls. • Super quick drying. • High Temperature Resistance >110C.
Available in 500ml aerosol cans and 17kg canister
Is a plasticiser-resistant adhesive for
permanently bonding a variety of
floorcoverings, including vinyl and PVC
to a wide range of subfloors. Coverage: approx. 3m2 per can onto a single non-porous surface • Plasticiser resistant. • Excellent bond strength. • Easy to use.
Available in 500ml aerosol cans
A powerful solvent based cleaner to quickly remove adhesive, oils, grease and other organic substances. Perfect for cleaning larger canister guns and hoses. • Higher adhesive per can. • Quick and easy to use. • Powerful action.
Available in 500ml aerosol cans
Gekko G52 Contact Adhesive is a pressure sensitive spray adhesive featuring fast cure times and increased coverage. It is suitable for the permanent fixing of carpets and carpet tiles.
Using the unique Co-RezTM technology, a 22ltr canister of G52 contains 15% more adhesive than the industry standard.
Universal pressure-sensitive and wet adhesive
• Odourless during and after application • Excellent working properties • Good tack with stringing • Solvent-free • EMICODE EC 1 PLUS/Very low emission
Available in 14kg tubs. Technical Data Sheet
Universal Premium dispersion-based flooring adhesive
• Wide range of applications • Suited for wet bonding • Pressure sensitive adhesion and contact bonding • Particularly long open time • Very economical.
Available in 14kg tubs
Fibre reinforced PVC-design covering adhesive
• Good wetting property • High final strength • Stable adhesive grooving
Available in 14kg tubs
ARDITEX CL is a latex levelling and smoothing compound with excellent flow and application properties.
Apply most floorcoverings after 12 hours. Receives light foot traffic in as little as 2 hours. Excellent flow and application properties. Can be used on heated screeds. Unit Size Available: 20kg Powder & 4.8kg Latex. Coverage: Approximately 5m2 at 2-3mm thick per unit Technical Data Sheet
ARDITEX NA is an Ultra Rapid Setting Latex Sub-Floor Levelling and Smoothing Compound.
By reducing the need for intensive preparation and priming, ARDITEX NA saves you both time and money. Renowned versatility, advanced site tolerance and a reduction in preparation machinery hire, lost time and call backs, all help to ensure that with ARDITEX NA, there really is no alternative. Unit Size Available: 20kg Powder & 4.85kg Latex. Coverage: Approximately 5m2 at 3mm thick per unit Technical Data Sheet
UltraFloor Level IT Super30 is a high specification, high strength, rapid drying and curing two-part cementitious smoothing underlayment. Designed for fast turnaround projects, Level IT Super30 is suitable for use as an underlayment for most floor coverings including sheet vinyl, LVT, linoleum and rubber and breathable textiles. Technical Data Sheet
UltraFloor Level IT Base is a rapid setting and hardening, high strength, single part, cementitious smoothing underlayment incorporating recycled raw materials. Level IT Base may be mixed up and applied as single units and it’s especially suited to larger projects where it is ideal for pumping applications and can be applied up to depths of 50mm. Technical Data Sheet
UltraFloor Level IT Bond is a rapid curing, high performance two-part smoothing underlayment. It has exceptional adhesion characteristics making it suitable for use over a wide variety of subfloors and substrates, including old adhesive residues, and for use in both domestic and commercial flooring projects. Technical Data Sheet
UltraFloor Feather IT is a rapid drying, very fine particle, high polymer cementitious compound. It offers excellent adhesion characteristics and is suitable for application to a wide variety of substrates. Feather IT is ideal for use on flooring grade mechanically fixed plywood as well as for filling in gouges, depressions and improving smoothing underlayment applications. Technical Data Sheet
UltraFloor Level IT Renovate is suitable for the refurbishment of existing floors to depths between 3-40mm. The product is suitable for use on both commercial and domestic applications. It has excellent flow properties making it ideal for a wide range of flooring substrates. Technical Data Sheet
UltraFloor Level IT Super Flex 30 is a high specification, high strength, rapid curing, fibre reinforced two component smoothing underlayment. Specially designed for fast turnaround projects and for floors subject to slight vibration or thermal movement, UltraFloor Level IT Super Flex 30 is suitable for use as an underlayment for most floor coverings including sheet vinyl, LVT, linoleum and rubber and breathable textiles. Technical Data Sheet
UltraFloor Level IT Smooth is a high strength, single part, cementitious smoothing underlayment, incorporating a blend of graded fillers, fine cements and polymers. Level IT Smooth has been specially designed for use as an underlayment for most floor coverings including sheet vinyl, LVT, linoleum and rubber. Technical Data Sheet
UltraFloor Level IT Two is a general purpose, mid strength, two-part smoothing underlayment. Its exceptional flow characteristics make it a very easy material to apply to a variety of subfloors in both commercial and domestic flooring projects. Technical Data Sheet
UltraFloor Prime IT Multi-surface Primer is a moisture tolerant, water based acrylic primer, sealer and bonding aid, suitable for porous and non-porous substrates. Prime IT Multi-surface Primer has been designed to promote the adhesion of UltraFloor smoothing underlayments. Technical Data Sheet
UltraFloor Suppress IT is a ready to use single component rapid drying moisture suppressant primer membrane. It is water based and solvent free and must be applied in two coats. Designed to suppress residual construction moisture thus allowing earlier installation of floor coverings. Technical Data Sheet
UltraFloor DPM IT is a two component, solvent free epoxy resin system for use as a surface damp proof membrane and as a screed bonding aid (primer) for industrial flooring applications. DPM IT has been designed to provide protection against subfloor moisture and as a primer for bonded screed installations. Technical Data Sheet
JM300 is a solvent free modified acrylic emulsion adhesive. It is designed to provide a permanently tacky film for the positive holding of “loose-lay” carpet tiles but to enable them to be lifted and replaced easily when required. Technical Data Sheet
JM400 Multipurpose Adhesive is a superior performing high solids, water based floorcovering adhesive offering fast wet grab and strong final bond. The adhesive is designed to suit a wide range of carpets. This includes carpets with hard to bond synthetic backings, such as latex/unitary or Action-Bac as well as Axminsters and jute hessian backed. Technical Data Sheet
JM500 is a solvent free acrylic emulsion based adhesive. This easy to spread adhesive, with long open time, provides early tack and minimum slip, quickly building to a strong permanent bond. Technical Data Sheet
JM700 is a solvent free pressure sensitive acrylic adhesive that is easily applied either by trowel, roller or brush. It dries quickly to form a strong pressure sensitive adhesive for resilient floorcoverings. Technical Data Sheet
Flexyfix is a rapid curing, cartridge delivered, flexible MS Polymer adhesive. Suitable for nosings, gripper, thresholds, skirting, wood flooring and many other uses. Flexyfix comes with a 15 year adhesive bond warranty when fixing nosing. Nosing jobs can be logged here with Rewmar, to register for the warranty. Flexyfix is loved by fitters throughout the nation. Available in 12 x 290ml cartridges per box. Technical Data Sheet
Rewmar MS Polymer is a one part, modified silane based flexible wood flooring adhesive. Being solvent and water free it has low VOC emissions. It is suitable for sticking down most wooden flooring to almost any subfloor, including those with underfloor heating. Available in 16kg tubs, with a coverage of approximately 16m2 if applied with a 6mm V notched trowel. Technical Data Sheet
MS 650 is a single part gun applied MS Polymer adhesive. Suitable for either liquid batten or acoustic mat applications. Being solvent and water free it has low VOC emissions. Suitable for most substrates including those with underfloor heating. Moreover, the good ridge formation helps ensure a successful installation. Packed in a box containing 12 x 600ml foil sausages. Technical Data Sheet
Rewmar Rapid Primer is a fast drying, one part polyurethane based primer. It designed for use over all sand / cement screeds that are not under hydrostatic pressure and contain up to a maximum of 95% relative humidity. For use as an adherence primer apply one coat over porous / non porous & smooth surfaces. For use as a moisture barrier apply two or three coats in cross layers, if the concrete moisture is over 95% then use Rewmar MB – 2 Part Epoxy DPM. Technical Data Sheet